Corner cabinets are awkward by nature. The space is there, but reaching it without crouching or emptying half the cupboard first is another matter. The Vauth-Sagel VS COR Flex is a pull-out fitting built specifically for this corner, with four wire baskets mounted on a steel frame that glides the whole arrangement out towards you in one movement. It is chosen by Mastercraft Kitchens for corner base units where storage would otherwise go to waste.

The frame carries two baskets fixed to the door and two to the rear, so opening the door brings the entire set forward together. Full extension means the baskets come right out into the room rather than stopping halfway, so you can see and reach everything inside without leaning into the cabinet.

Key Benefits

• Pulls the full contents of the corner forward in one motion, so nothing gets pushed to the back and forgotten.
• Four baskets give you separate zones, useful for keeping pans apart from tins or everyday items apart from occasional ones.
• Full extension runners mean you are not reaching blind into the depths of the cabinet.
• Unhanded installation, so it fits either a left or right hand corner cabinet without needing a mirrored version.
• Tubular steel frame and fixings are supplied as a complete set, with fitting instructions included.
• Available in white or grey Premea baskets with silver epoxy coated frames, so you can match the finish to your cabinetry.

There are some practical limits worth knowing before you plan the cabinet around it. The fitting needs a minimum internal cabinet depth of 480mm, and is specified for either a 450mm or 500mm door width depending on which option you choose. Internal cabinet height and total load capacity vary slightly between the finish and width options, so your designer will confirm the exact figures for your cabinet before specifying it.

What's Included

• 1x frame set: hanging frames and base mounting track, silver epoxy coated tubular steel, with front and back frames in the same finish
• 1x basket set: 2x storage baskets fixed to the rear, 2x storage baskets fixed to the door
• Fixing materials and fitting instructions

Specifications

• Type of pull out: Full extension
• Material: Tubular steel hanging frames and base mounting track
• Installation: Unhanded
• For internal cabinet depth, minimum: 480mm
• For internal cabinet width: 450mm or 500mm, depending on option selected
• Load bearing capacity: up to 32kg total, up to 8kg per basket (figures may vary slightly by option)
• Guarantee: 10 years