The Abode Neron 1.5 Bowl Inset Sink pairs a stainless steel sink with the Specto tap, giving you a single, coordinated fitting for your main preparation area. The sink sits into the worktop with a main bowl for everyday washing and cooking tasks, plus a smaller second bowl for draining, rinsing or keeping washing-up separate from food prep. It's specified for Mastercraft kitchen designs where a practical, well-proportioned sink and tap combination is needed at the centre of the kitchen.

Key

Benefits

• The main bowl is deep enough to take larger pans and oven trays, so you're not stacking cookware awkwardly or fighting for space when clearing up after cooking.
• The second bowl gives you somewhere to put washing-up liquid, a colander or rinsing water without it taking over the main bowl, useful if more than one person is working in the kitchen at once.
• The drainer position is reversible, which means the sink can be fitted to suit the flow of your kitchen, whether that's left to right or the other way round, depending on where your worktop run and appliances sit.
• Built from 304 stainless steel with a polished finish, it's made to handle daily use, from hot pans to scouring, without the finish deteriorating.
• The Specto tap uses a single lever, so you can adjust temperature and flow with one hand, helpful when the other is holding a pan or a child's hand.
• An antisplash spout is fitted as standard, which cuts down on water spitting back out of the bowl when you're rinsing at speed.
• The sink carries a 10 year guarantee and the tap a 5 year guarantee, giving you a reasonable degree of reassurance for a fitting you'll use several times a day.

Fitting this sink calls for a cabinet width of 600mm or more, with a cut-out of 980 x 480mm, so it's worth checking this against your cabinet run early in the design. The tap needs a minimum water pressure of 0.6 bar to work as intended, which is worth confirming if your home has a low-pressure supply. Two tap holes come pre-cut into the sink at 35mm each, and the pack includes the fittings needed to install both sink and tap together, with a couple of optional extras available if you'd like to discuss them.

Specifications

• Sink range: Neron, Model AW5113
• Sink material and finish: 304 Stainless Steel, Polished
• Sink dimensions: W 1000 x D 500 x H 218mm
• Cut-out dimensions: W 980 x D 480mm
• Minimum cabinet width: 600mm